Research of simulation model of electrocoagulation process

Authors

  • Andrii Safonyk National University of Water and Environmental Engineering http://orcid.org/0000-0002-5020-9051
  • Anna Burduk Wroclaw University of Science and Technology
  • Ivan Targoniy National University of Water and Environmental Engineering

DOI:

https://doi.org/10.31713/MCIT.2019.67

Keywords:

electrocoagulation, simulation model, automation, sewage, regulation

Abstract

A mathematical model of the electrocoagulation process has been constructed, taking into account the geometric dimensions of the reactor, the volumetric flow rate of the liquid and the applied current. A simulation model has been developed that describes the processes occurring in a coagulator, on the basis of which was studied the influence of current, changes in the concentration of inlet contamination on the concentration of the target component at the outlet of the reactor.

Downloads

Published

2019-11-05

How to Cite

Safonyk, A., Burduk, A., & Targoniy, I. (2019). Research of simulation model of electrocoagulation process. Modeling, Control and Information Technologies, (3), 117–118. https://doi.org/10.31713/MCIT.2019.67

Issue

No. 3 (2019): Modeling, control and information technologies

Section

Problems of automated control, optimization and parameters identification

License

All materials are distributed under the terms of the Creative Commons Attribution 4.0 International License, which allows others to distribute the work with attribution to the authorship of this work and the first publication in this journal.

Most read articles by the same author(s)